The knife heating device | Cooperative PAVIK
- 7000.00 ₴
The knife heating device is produced for heating the uncapping knives with hot water (wedge knives, straight knives, vibrating knives)
The device is installed on the side panel of the uncapping table or is placed on a flat floor very close to the uncapping knives.
The container which is fixed at the bottom of the device is filled with water through the expansion tank.
You can control the water level by marks on the expansion tank.
The heating element built into the tank heats the water up to 97 ° C. The water is pumped into the supply system by a circulation pump and fed to the knives.
The water flow rate is regulated by the pump switch.
The pump continuously supplies water to the water supply system of the knives and starts working simultaneously with the heating element when the device is turned on.
The device is equipped with a digital thermostat that displays the temperature of the water heated in the tank.